Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 436

Chapter 6 Component Guide Section  Block    Name On Off Nominal Minimum Function Turns ON send from all input channels to output buses. The [ON] button lights up. Turns OFF send from all input channels to output buses. Resets all send levels, making them 0 dB. The delay settings are not changed. Resets all send levels, making them -∞ dB. The delay settings are not changed.  Matrix (Delay Meter/Output Level Meter) The upper row has delay meters, while the middle row has send level meters. You can view parameters for all output channels at once. Delay Meter Send Level Meter When you click the output channel number on the matrix, the [Delay Matrix - All Inputs to One Output] editor window opens. When you click the input channel number on the left side of the matrix, the [Delay Matrix - One Input to All Outputs] editor window opens. Click to open the [Delay Matrix - All Inputs to One Output] editor window. Click to open the [Delay Matrix - One Input to All Outputs] editor window. The matrix is divided into groups. For the 2 Input matrix, each group has two input channels and four output channels. For the 4 Input matrix, each group has four input channels and four output channels. Groups in matrixes with more than four inputs are the same as for the 4 Input matrix. When you place the mouse pointer over a group, its channel numbers are highlighted. Click to open the [Delay Matrix - Crosspoint] editor window. Click to open the "In 1-4 x Out 1-4" Crosspoint window. Click to open the "In 5-8 x Out 5-8" Crosspoint window. For 2 input matrix, click to open the "In 1-2 x Out 1-4" Crosspoint window. 436 DME Designer Owner's Manual