Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 390
When you click the [Delay] button for the crossover processor, it opens the delay editor window.
![]() |
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
Chapter 6 Component Guide Delay When you click the [Delay] button for the crossover processor, it opens the delay editor window. Here you can set the delay for each frequency band. [Crossover Processor - Delay] editor window Parameter Delay Level On Mute Delay Scale Setting Range Function ms: 0 to 500 Sets the delay time. Sample: the range depends on the Fs value. Meter: 0 to 171.8 Feet: 0 to 563.6 Frame: the range depends on the Frame value. Beat: the range depends on the Beat value. -∞ to ±0 dB Sets the output signal level for each channel ON/OFF Turns delay ON. ON/OFF Mutes the signal for each frequency band. ms Sample Meter Feet Frame Beat Selects the units for setting the delay time. The selected button will light up, and the units in the [Delay] edit box will change. If [Beat] is selected, use the knob to set the BPM (beats/minute). NOTE Delay Scale does not support the parameter link feature. Refer to "Parameter Link" on page 94 for information on parameter linking. 390 DME Designer Owner's Manual
![](/manual_guide/products/yamaha-v40-dme-designer-v40-owners-manual-50920ae/390.png)