Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 192

Chapter 4 Designer Editing Configurations Configurations Information about inputs/outputs, along with the arrangement of components and how they are connected, is called a "configuration." Configurations are created in the Designer window and sent to the DME unit. In the Designer window, configurations are designed using various design windows, such as the Area, Zone, Configuration, and User Module windows. In each window a sheet is displayed, on which objects can be arranged. New Configurations Multiple zones can be created for an area, multiple device groups can be created for a zone, and multiple configurations can be created for a device group. Zones can be added via the "Zone Manager" window, device groups can be added via the "Device Group and Sampling Frequency Settings" window, and configurations can be added via the "Configuration manager" window. Information about the "Zone Manager" window can be found in the "Adding, Deleting, and Renaming a Zone" section on page 291, information on the "Device Group and Sampling Frequency Settings" window can be found in the "Device Group Selection" section on page 276, and information on the "Configuration Manager" window can be found in the "Adding, Deleting, and Renaming a Configuration" section on page 295. Security Editing in the Designer window can be restricted based on the user security settings. Only users for whom the [Operation Security]  [Edit] checkbox in the "Security" dialog box has been checked can display the Designer window and edit configurations. For information about the "Security" dialog box, see "Security (Creating Users and Making User Settings)" on page 82. Edit Mode There is an "Edit Mode" in the Designer window when offline status. When the Edit Mode is ON, configurations can be edited. When it is turned OFF, configurations cannot be edited. When online, the Edit Mode is OFF. NOTE SP2060 configurations cannot be edited. 192 DME Designer Owner's Manual