Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 379

Chapter 6 Component Guide Ambient Noise Compensator The Ambient Noise Compensator automatically adjusts program source level to compensate for ambient noise levels. Mono and stereo components are provided. Double-click the component to open the component editor. The component editor is the same for stereo and mono types, the only difference being the number of channels.          Section Parameter  Ambient Noise Level Meter  Sense Threshold Setting Range -∞ to 0.00 dB  Gap  Detect Threshold -∞ to 0.00 dB  Time  Program Source Min Gain Gain  Max Gain  Gain Ratio 0.1 to 5.0 sec -18.0 to 0.0 dB 0.0 to +18.0 dB 0.5:1 to 2.0:1  Response Time 1 to 60 sec Function Displays the ambient noise level. Sets the average ambient noise level. The program source level is increased when this threshold level is exceeded. The program source level is lowered when this threshold level is not reached. Lights when a gap is detected in the program source. Sets the program source threshold level. A "gap" is assumed if the program source level remains below the threshold for a specified amount of time. Sets the time interval for gap detection. Sets the minimum level for program source level compensation. Sets the maximum level for program source level compensation. Sets the amount of program source level compensation. This is specified as a ratio between the amount of program source level compensation, and the amount the ambient noise level has exceeded the threshold. Sets the response time for level compensation. DME Designer Owner's Manual 379