Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 223

Chapter 4 Designer [Check All] Button Checks all checkboxes. [Clear All] Button Clears all checkboxes. [OK] Button Updates the settings and closes the dialog box. [Cancel] Button Closes the dialog box without changing the settings. "Cascade Setting" Dialog Box Setting Chart Cascade Destination Head Margin Mixer I/O Signal Direction ,  ,  DME64N Only PM5D/DM2000 CASCADE Bus PM5D Slot Output* 18dB (automatic) OFF 18dB ON OFF 0 dB ON OFF Always Bidirectional - Unidirectional Bidirectional Always Unidirectional Unidirectional Bidirectional Always Unidirectional * When a cascade connected PM5D is set up to send the slot output signals via its CASCADE OUT terminal. Mixer  CASCADE OUT DME64N #1  CASCADE IN CASCADE OUT DME64N #2 CASCADE IN CASCADE OUT  DME64N #3 Mixer  CASCADE IN CASCADE OUT CASCADE IN  Edit Port Label and Type Dialog Box The Edit Port Label and Type dialog box will appear when the [Edit Port Label and Type] button is clicked. Specifies the port labels and types to be displayed to the left and right of DME and SP2060 objects. To set labels enter the [Port Name] for [Left] and [Right]. Each name can be up to 100 characters in length. To set the port type use [Port Type] to select the [Left] and [Right] types. DME Designer Owner's Manual 223