Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 174
MIDI Tab, DME64N, DME Satellite, Remote232C, USB-1, Slot1-Slot4, Remote
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Chapter 3 Main Panel Window MIDI Tab Port Selects the MIDI port to be used. If the selected terminal was previously assigned to a different function, a confirmation dialog will appear. The available ports depend on the device. DME64N: OFF, Remote(RS-232C), Remote(RS-422), MIDI, USB-1-2, Slot1-4 DME24N: OFF, Remote(RS-232C) , Remote(RS-422), MIDI, USB-1-2, Slot1 DME Satellite: OFF, Remote, USB-2 OFF: Select "OFF" when this function is not to be used. Remote(232C): MIDI data will be received via the DME64N/24's [REMOTE] connector using an RS-232C connection. Remote(422): MIDI data will be received via the DME64N/24's [REMOTE] connector using an RS-422 connection. MIDI: The MIDI connector is the currently active MIDI port. USB-1, USB-2: The corresponding USB port is selected for MIDI input. Slot1-Slot4: A card installed in the corresponding I/O slot is currently selected for MIDI input. Remote: The [REMOTE] connector of the DME Satellite is currently active MIDI port. NOTE When "Remote" is selected for a DME Satellite unit, be sure to change the [REMOTE] connector setting (RS-232C or RS422) via the rear-panel DIP switches. 174 DME Designer Owner's Manual