Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 143
CobraNet Connection, Select Slot
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Chapter 3 Main Panel Window CobraNet Connection Use a CobraNet interface card such as the MY16-CII to make CobraNet connections between the digital mixer and DME units. Use an Ethernet cable connected to the [NETWORK] connectors to make connections between DME series units. The port to be used for head amp control is specified via the [Internal HA Control] parameter in the "Remote" tab in the "Utility" dialog box (page 172). Select "Slot 1" when the DME unit to be used for serial communication is a DME24N, "Slot 1" through "Slot 4" if it is a DME64N, or "CobraNet" if it is a DME Satellite unit. The settings for all other DME units should be "OFF". It is also necessary to match the CobraNet serial communication channels of the interface card installed in the serially connected DME unit with that of the interface card in the digital mixer. Refer to page 495 for DME8i-C/8o-C/4io-C information. Refer to the CobraNet Manager Lite for Yamaha Owner's Manual for more information on setting the MY16-CII. Set the serial channel for all other devices to "OFF". CobraNet MY16-CII Network Switch MY16-CII DME24N Ethernet Network Switch DME8i-C DME4io-C LS9 NOTE When two MY16-CII or similar CobraNet interface cards are installed in an LS9-32 in order to control multiple DME units, use the COMM PORT parameter in the LS9 EXTERNAL HA display to select the slot to be used. DME Designer Owner's Manual 143