Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 489

Chapter 6 Component Guide Cascade (DME64N only) Up to eight DME64N units can be cascade connected to provide bus sharing of up to 32 channels in order to distribute DSP resources and/or increase input/output capacity. If [Show Cascade port on Configuration Window] in the "DME Device Properties" dialog box is checked, Cascade I/O components will appear in the Configuration window. Refer to "When the DME64N Cascade Setting is Turned ON" (page 215), and to "'Cascade Setting' Dialog Box" (page 221) for further information. NOTE Be careful to avoid loop connections both when connecting via physical cables and in the Designer window.  Cascade In Signals received from the CASCADE bus are assigned to the Cascade In component. Any cascade connected DME64N unit is capable of outputting the same signals. The meter displays the signal levels received at the rear-panel CASCADE IN terminal. Right-click the component and select [Open Component Editor] from the contextual menu to open the component editor. The component editor is the same for all types. Name  Meter Function Shows the signal level for each channel. DME Designer Owner's Manual 489