Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 396

Chapter 6 Component Guide  Delay When you click the [Delay] button for the crossover processor, it opens the delay editor window. Here you can set the delay for each frequency band.     Parameter  Delay  Level  On  Delay Scale Setting Range Function ms: 0 to 500 Sample: the range depends on the Fs value. Meter: 0 to 171.8 Feet: 0 to 563.6 Frame: the range depends on the Frame value. Beat: the range depends on the Beat value. Sets the delay time. -∞ to ±0 dB Sets the output signal level for each channel. ON/OFF Turns delay ON. ms Sample Meter Feet Frame Beat Selects the units for setting the delay time. The selected button will light up, and the units in the [Delay] edit box will change. If [Beat] is selected, use the knob to set the BPM (beats/minute). NOTE Delay Scale does not support the parameter link feature. Refer to "Parameter Link" on page 94 for information on parameter linking. 396 DME Designer Owner's Manual