Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 432
Master Output, Gain Correct
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 432 highlights
Chapter 6 Component Guide Section Parameter Setting Range Function Decay 44.1 kHz: 110 ms to 46 s Sets the speed for closing the gate. 48 kHz: 101 ms to 42.3 s The setting range may vary, depending 88.2 kHz: 55 ms to 23 s on the operating frequency. 96 kHz: 51 ms to 21.1 s Solo ON/OFF Turns solo ON. If Solo is engaged for even one channel, all non-Solo channels will be muted. On ON/OFF Turns ON each channel's input. Fader -∞ to +10 dB Sets the input signal level for each channel. Master Output Gain Correct ON/OFF Automatically adjusts the master output level to maintain a constant level according to the number of input channels with open gates. (*1) On ON/OFF Turns ON each channel's output. Master -∞ to +10 dB Sets the output signal level. *1 The amount of gain compensation varies according to the number of input channels with open gates as follows: Number of channels with open gates 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Amount of gain compensation 0.0 dB 0.0 dB -3.0 dB -4.8 dB -6.0 dB -7.0 dB -7.8 dB -8.5 dB -9.0 dB -9.5 dB -10.0 dB -10.4 dB -10.8 dB -11.1 dB -11.5 dB -11.8 dB -12.0 dB 432 DME Designer Owner's Manual