Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 415

Chapter 6 Component Guide Section  Equalizer      Input  HPF !  LPF   Notch ?   Output Parameter Bypass Gain GEQ ON Range EQ Flat Level Phase Frequency Bypass Frequency Bypass Frequency Q: Bypass Level On Setting Range ON/OFF Set by [Range]. ON/OFF ±15 ±12 ±6 -24 --∞ to +10 dB ON/OFF 20 Hz to 20 kHz ON/OFF 20 Hz to 20 kHz ON/OFF 20 Hz to 20 kHz 0.1 to 63.0 ON/OFF -∞ to ±0 dB ON/OFF Function Turns ON bypass for each band. Sets the output gain for its band. Turns the GEQ ON. Selects the gain adjust width. Returns the faders of all bands to 0dB. Sets the input signal level. Reverses the phase of the input signal. Sets the HPF cutoff frequency. Turns bypass ON. Sets the LPF cutoff frequency. Turns bypass ON. Sets the notch filter frequency. Sets the width of the frequency band that will be changed by the filter. Turns bypass ON. Sets the signal level. Turns output ON.  EQ Graph [Bypass] Button A number for each frequency band is displayed on these buttons. When you click the button, it lights up and the bypass turns ON. When you turn this ON, bypassed sound (unchanged sound) is output. When you turn this OFF, the sound is output with effects applied. Bypass ON Bypass OFF DME Designer Owner's Manual 415