Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 470
Click the Speaker Processor [Limiter] button to open the window. Limiter settings are provided
![]() |
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 470 highlights
Chapter 6 Component Guide Limiter Click the Speaker Processor [Limiter] button to open the window. Limiter settings are provided for each output channel. [Speaker Processor - Limiter] Editor Window Limiter Curve Name Gain Reduction Meter Output Meter Parameter Range Threshold -54 dB to ±0 dB Attack Fast Mid Slow Manual (0 to 120ms) Release On Fast Mid Slow Manual (44.1kHz: 6ms to46s 48kHz: 5ms to 42.3s 88.2kHz: 3ms to 23s 96kHz: 3ms to 21.1s) ON/OFF Function A graphic representation of limiter response. The horizontal axis represents input level, and the vertical axis represents output level. Displays the amount of gain reduction. Displays the output level. Function Sets the threshold level. Selects the attack speed of the limiter. If the Manual setting is selected, specify the attack time in msec units. If Fast/Mid/Slow is selected, the attack time is specified roughly according to the HPF cutoff frequency of Speaker Processor's Crossover. Fast : 1/4 wavelength of cutoff frequency Mid : 1/2 wavelength of cutoff frequency Slow : 1 wavelength of cutoff frequency Selects the release speed of the limiter. If the Manual setting is selected, specify the release time in msec. If Fast/Mid/Slow is selected, the release time is specified roughly according to the HPF cutoff frequency of Speaker Processor's Crossover. Fast : 4 wavelength of cutoff frequency Mid : 8 wavelength of cutoff frequency Slow : 16 wavelength of cutoff frequency Turns the limiter ON. The limiter is bypassed when the button is turned OFF. 470 DME Designer Owner's Manual
![](/manual_guide/products/yamaha-v40-dme-designer-v40-owners-manual-50920ae/470.png)