Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 467

Chapter 6 Component Guide  Crossover Click the Speaker Processor [Crossover] button to open the crossover editor window. [Speaker Processor - Crossover] editor window         Section  Polarity  Mute  Frequency  LPF   Parameter Type Frequency Gc Range Normal/Inverted ON/OFF 20 Hz to 20 kHz Thru 6dB/Oct 12dB/Oct AdjustGc 12dB/Oct Butrwrth 12dB/Oct Bessel 12dB/Oct Linkwitz 18dB/Oct AdjustGc 18dB/Oct Butrwrth 18dB/Oct Bessel 24dB/Oct AdjustGc 24dB/Oct Butrwrth 24dB/Oct Bessel 24dB/Oct Linkwitz 36dB/Oct AdjustGc 36dB/Oct Butrwrth 36dB/Oct Bessel 48dB/Oct AdjustGc 48dB/Oct Butrwrth 48dB/Oct Bessel 48dB/Oct Linkwitz 20 Hz to 20 kHz -6 dB to +6 dB Function Inverts the polarity of each output channel. Mutes the output of each output channel. This parameter is linked to the Mute setting in the original window. Sets the crossover frequency between output channels. The display appears as a dotted line when muted. Sets the roll-off slope and filter type for each octave. The filter is bypassed when [Thru] is selected. Sets the LPF cutoff frequency. Sets the cutoff frequency gain when the [Type] setting is [AdjustGc] (Adjustable Gc). DME Designer Owner's Manual 467