Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 123

Chapter 3 Main Panel Window • [Scene Change] The recall status of the specified scene is transmitted via GPI output. [Parameter] specifies the scene for which the recall status is to be output. [Threshold] and [Polarity] are not available. [Terminal] determines how the GPI voltage will be output in response to parameter changes. Terminal GPI Output When the current scene is the same as the scene specified by [Parameter] the output will be high, and when different the output will be low. When the current scene is the same as the scene specified by [Parameter] the output will be low, and when different the output will be high. A pulse*1 will be output when the current scene is the same as the scene specified by [Parameter]. A pulse*2 will be output when the current scene is the same as the scene specified by [Parameter]. • [GPI Lock] The GPI Lock status is transmitted via GPI output. [Parameter], [Threshold], and [Polarity] are not available. [Terminal] determines how the GPI voltage will be output in response to parameter changes. Terminal GPI Output When GPI Lock is ON the output will be high, and when OFF the output will be low. When GPI Lock is ON the output will be high, and when OFF the output will be low. • [Direct Parameter Value] GPI output is produced when a component parameter reaches a specified value. [Parameter] sets the parameter name. [Threshold] sets the parameter value. [Polarity] is unavailable. [Terminal] specifies the type of GPI output produced. Terminal GPI Output A high level is output when the value specified by [Parameter] is equal to [Threshold]. A low level is output when the value specified by [Parameter] is equal to [Threshold]. Pulse waveform 1 (*1) is output at the instant the value specified by [Parameter] becomes equal to [Threshold]. Pulse waveform 2 (*2) is output at the instant the value specified by [Parameter] becomes equal to [Threshold]. • [Audio Detector] The audio signal status detected by the Audio Detector component is output via GPI OUT. [Parameter] selects the Audio Detector component that will produce GPI output according to the detected audio signal status. [Terminal] and [Polarity] specify the type of GPI output produced. Terminal Polarity Ignored Ignored GPI Output High level while an audio signal is detected, low level while no audio signal is detected. High level while no audio signal is detected, low level while an audio signal is detected. Pulse waveform 1 (*1) is output when the status changes from no audio signal detected to audio signal detected. Pulse waveform 1 (*1) is output when the status changes from audio signal detected to no audio signal detected. DME Designer Owner's Manual 123