Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 468

Chapter 6 Component Guide Section  HPF   Parameter Type Frequency Gc Range Thru 6dB/Oct 12dB/Oct AdjustGc 12dB/Oct Butrwrth 12dB/Oct Bessel 12dB/Oct Linkwitz 18dB/Oct AdjustGc 18dB/Oct Butrwrth 18dB/Oct Bessel 24dB/Oct AdjustGc 24dB/Oct Butrwrth 24dB/Oct Bessel 24dB/Oct Linkwitz 36dB/Oct AdjustGc 36dB/Oct Butrwrth 36dB/Oct Bessel 48dB/Oct AdjustGc 48dB/Oct Butrwrth 48dB/Oct Bessel 48dB/Oct Linkwitz 20 Hz to 20 kHz -6 dB to +6 dB Function Sets the roll-off slope and filter type for each octave. The filter is bypassed when [Thru] is selected. Sets the HPF cutoff frequency. Sets the cutoff frequency gain when the [Type] setting is [AdjustGc] (Adjustable Gc).  Delay Click the Speaker Processor [Delay] button to open the window. Delay can be set independently for each output channel. [Speaker Processor - Delay] editor window    Parameter  Delay  On  Delay Scale Range Function ms: 0 to 500 Sets the delay time. Sample: the range Two edit boxes show milliseconds and the unit depends on the Fs value. specified in the [Delay Scale] section. Meter: 0 to 171.8 Sets the output level for each band. Feet: 0 to 563.6 Frame: the range depends on the Frame value. Beat: the range depends on the Beat value. ON/OFF Turns delay ON. ms Sample Meter Feet Frame Beat Selects the delay time units. The selected button will light and the [Delay] edit box will change accordingly. When [Beat] is selected the knobs can be used to adjust BPM. NOTE Delay Scale does not support the parameter link feature. Refer to "Parameter Link" on page 94 for information on parameter linking. 468 DME Designer Owner's Manual