Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 431
Mixer, Auto Mixer
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 431 highlights
Chapter 6 Component Guide Mixer The Mixer group contains the Auto Mixer, Auto Mixer II, Delay Matrix, Matrix Mixer, and Simple Mixer. Auto Mixer There is a noise gate for each input channel, which passes only signals that exceed a specified threshold. There are five mixer types, each with a different number of inputs. Double-click a component to display the component editor for it. The number of channels varies depending on the component, but all share a common configuration in the component editor. The auto mixer component editor consists of two sections: input channels and master output. Auto Mixer component editor Section Parameter Setting Range Function Input Channels Phase ON/OFF Reverses the phase of each channel's input signal. Gate Indicator -- When the gate is open, the light turns green. When the gate is closed, the light turns yellow. Threshold -54 dB to ±0 dB Sets the threshold value for each gate. Hold 44.1 kHz: 110 ms to 2.13 s Sets the gate hold time. 48 kHz: 101 ms to 1.96 s The setting range may vary, depending 88.2 kHz: 55.1 ms to 1.06 s on the operating frequency. 96 kHz: 50.6 ms to 981 m DME Designer Owner's Manual 431