Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 439
One Input to All Outputs, Output Channel Switching
![]() |
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
Chapter 6 Component Guide Output Channel Switching The [Delay Matrix - All Inputs to One Output] editor window displays the output channel clicked on in the delay matrix component editor. The [Channel] buttons in the [Output] section of the [Delay Matrix - All Inputs to One Output] editor window switch the channel group that is displayed in the window. If you make the delay matrix component editor active while the [Delay Matrix - All Inputs to One Output] editor window is displayed, and then click another output channel, that channel group will be displayed in the [Delay Matrix - All Inputs to One Output] editor window. One [Delay Matrix - All Inputs to One Output] editor window is displayed for each delay matrix component editor. One Input to All Outputs When you click the input channel number on the left side of matrix, the [Delay Matrix - One Input to All Outputs] editor window opens. One input channel and the send levels from the input channel to all output buses are displayed. The input channel is the one you have clicked on in the delay mixer component editor. ! Section Input Parameter Channel Phase Level Solo On Bus Send Level Delay Level On Setting Range Function -- Displays the selected input channel. Select another channel from a menu. ON/OFF Reverses the phase of the input signal. -∞ to +10 dB Sets the input signal level. ON/OFF Turns solo ON. If Solo is engaged for even one channel, all non-Solo channels will be muted. ON/OFF Turns input ON. 0 to 500 ms Sets the delay time from the input channel to each output bus. -∞ to +10 dB Sets the send levels from the input channel to each output bus. ON/OFF Turns ON the send from the input channel to each output bus. DME Designer Owner's Manual 439
![](/manual_guide/products/yamaha-v40-dme-designer-v40-owners-manual-50920ae/439.png)