Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 498

Chapter 6 Component Guide MY-Card This shows the input and output for the card inserted into the DME expansion slot. The following components are available, depending on the card types: Input Format/Output Format This is the I/O mode for high sample rate operation (88.2/96 kHz). In the Double Channel Mode, high sampling rate data (88.2/96 kHz) is transmitted and received by two channels, each channel handling the digital audio data at half the sampling rate. For this reason the total number of available channels is halved, and even-numbered channels are unavailable. In the Double Speed Mode digital audio data is transmitted and received at the current high sampling rate (88.2/96 kHz). In the Single Mode digital audio data is transmitted and received at half the current high sampling rate (88.2/96 kHz). Setting Examples Operation clock of related equipment 88.2/96 kHz (Double Channel) 88.2/96 kHz (Double Speed) 44.1/48kHz The DME operation clock 88.2/96 kHz Input Format/Output Format Double Channel Double Speed Single When the MY card word clock is used as the master word clock, Double FS determines whether the speed of that word clock is to be doubled and used as the DME clock. The Double Fs setting is only available the word clock from an MY Card is used.  MY-Others Right-click the block and select [Open MY-Card Editor] from the context menu to display the editor for it. This editor can be used for generic MY card editing, but some parameters are not available. Use a card specific editor when available.    Parameter  Input Format  Double Fs Setting Range DOUBLE SPEED/ DOUBLE CHANNEL/ SINGLE ON/OFF  Output Format DOUBLE SPEED/ DOUBLE CHANNEL/ SINGLE Function Selects the format for 88.2/96 kHz. When ON the speed of the word clock from the MY Card is doubled. Only displayed when this card is functioning as the word clock master. Selects the format for 88.2/96 kHz. 498 DME Designer Owner's Manual