Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 107
show stack-unit stack-ports pfc detail
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Example Figure 7-11. show stack-unit stack-ports ets detail Command Example FTOS#show stack-unit all stack-ports all ets details Stack unit 1 stack port all Max Supported TC Groups is 4 Number of Traffic Classes is 1 Admin mode is on Admin Parameters: Admin is enabled TC-grp Priority# Bandwidth TSA 0 0,1,2,3,4,5,6,7 100% ETS 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - FTOS# show stack-unit stack-ports pfc detail Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC operational mode on each unit with the configured priorities, link delay, and number of pause packets sent and received. Syntax show stack-unit {all | stack-unit} stack-ports {all | port-number} pfc detail Parameters stack-unit port-number Enter the stack unit. Enter the port number. Command Mode CONFIGURATION Command History Example Version 8.3.17.0 Supported on M I/O Aggregator Figure 7-12. show stack-unit all stack-ports all pfc details Command Example FTOS#show stack-unit all stack-ports all pfc details stack unit 1 stack-port all Admin mode is On Admin is enabled Local is enabled Link Delay 45556 pause quantum 0 Pause Tx pkts, 0 Pause Rx pkts FTOS# Data Center Bridging | 105