Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 126

www.dell.com | support.dell.com show ip igmp interface View information on the interfaces participating in IGMP. Syntax show ip igmp interface [interface] Parameters interface (OPTIONAL) Enter any of the following keywords and slot/port or number to clear counters from a specified interface: • For a Port Channel interface, enter the keyword port-channel followed by a number. Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.17.0 Supported on M I/O Aggregator Figure 10-2. show ip igmp snooping mrouter Command Example FTOS#show ip igmp interface Vlan 2 is up, line protocol is down Inbound IGMP access group is not set Interface IGMP group join rate limit is not set IGMP snooping is enabled on interface IGMP Snooping query interval is 60 seconds IGMP Snooping querier timeout is 125 seconds IGMP Snooping last member query response interval is 1000 ms IGMP snooping fast-leave is disabled on this interface IGMP snooping querier is disabled on this interface Vlan 3 is up, line protocol is down Inbound IGMP access group is not set Interface IGMP group join rate limit is not set IGMP snooping is enabled on interface IGMP Snooping query interval is 60 seconds IGMP Snooping querier timeout is 125 seconds IGMP Snooping last member query response interval is 1000 ms IGMP snooping fast-leave is disabled on this interface IGMP snooping querier is disabled on this interface --More-- show ip igmp snooping mrouter Displays multicast router interfaces. Syntax show ip igmp snooping mrouter [vlan number] Parameters vlan number Enter the keyword vlan followed by the vlan number. Range: 1 to 4094 124 | Internet Group Management Protocol (IGMP)