Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 93
Disable DCB Command Example, Command, History, Example 1
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Command History Version 8.3.17.4 Version 8.3.17.0 Added auto-detect parameter. Supported on M I/O Aggregator Example 1 Figure 7-1. Disable DCB Command Example FTOS#show dcb stack-unit 0 port-set 0 stack-unit 0 port-set 0 DCB Status : Enabled PFC Port Count : 56 (current), 0 (configured) PFC Queue Count : 2 (current), 0 (configured) FTOS# FTOS#conf FTOS(conf)#dcb enable ? on-next-reload Apply DCB configs on subsequent reload FTOS(conf)#no dcb enable on-next-reload FTOS(conf)#00:03:11: %STKUNIT0-M:CP %DIFFSERV-6-DCB_DISABLE_CFG_ON_RELOAD: Global DCB will be disabled on subsequent reload, All reserved PFC buffers will be deleted from each stack unit. For the pfc-buffering change to take effect, please save the config and reload the system. FTOS(conf)#end FTOS#00:03:23: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from console FTOS#write memory 00:03:28: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by default FTOS#reload Proceed with reload [confirm yes/no]: yes 00:04:13: %STKUNIT0-M:CP %CHMGR-5-RELOAD: User request to reload the chassis syncing disks... done unmounting file systems... unmounting /f10/flash (/dev/ld0e)... unmounting /usr (mfs:31)... unmounting /lib (mfs:23)... unmounting /f10 (mfs:20)... unmounting /tmp (mfs:15)... unmounting /kern (kernfs)... unmounting / (/dev/md0a)... done rebooting... FTOS# FTOS#show dcb stack-unit 0 port-set 0 stack-unit 0 port-set 0 DCB Status : Disabled PFC Port Count : 0 (current), 0 (configured) PFC Queue Count : 0 (current), 0 (configured) FTOS# Data Center Bridging | 91