Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 124
clear ip igmp groups, debug ip igmp, ip igmp snooping flood
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
www.dell.com | support.dell.com clear ip igmp groups Clear entries from the group cache table. Syntax Parameters clear ip igmp groups [group-address | interface] group-address interface (OPTIONAL) Enter the IP multicast group address in dotted decimal format. (OPTIONAL) Enter the interface type and slot/port information: For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094. Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator debug ip igmp Enable debugging of IGMP packets. Syntax debug ip igmp [group address | interface] To disable IGMP debugging, enter the no ip igmp command. To disable all debugging, enter the undebug all command. Defaults Disabled Parameters group-address interface (OPTIONAL) Enter the IP multicast group address in dotted decimal format. (OPTIONAL) Enter the interface type and slot/port information: For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094. Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator ip igmp snooping flood This command controls the flooding behavior of unregistered multicast data packets.When flooding is disabled, unregistered multicast data traffic is forwarded to only multicast router ports in a VLAN. If there is no multicast router port in a VLAN, unregistered multicast data traffic is dropped. Syntax ip igmp snooping flood Defaults Enabled Command Modes CONFIGURATION Command History Version 8.3.17.0 Supported on M I/O Aggregator 122 | Internet Group Management Protocol (IGMP)