Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 98

www.dell.com | support.dell.com Example Figure 7-5. show interface dcbx detail Command Example FTOS#show int tengigabitethernet 1/49 dcbx detail E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled F-Application priority for FCOE enabled f-Application Priority for FCOE disabled I-Application priority for iSCSI enabled i-Application Priority for iSCSI disabled Interface TenGigabitEthernet 1/49 Port Role is Auto-Upstream DCBX Operational Status is Disabled Is Configuration Source? FALSE Local DCBX Compatibility mode is AUTO Local DCBX Configured mode is AUTO Peer Operating version is Not Detected Local DCBX TLVs Transmitted: ErPfi FTOS# Table 7-1 lists the show interface dcbx detail field descriptions. Table 7-1. show interface dcbx detail Command Example Fields Field Description Interface Interface type with chassis slot and port number. Port-Role Configured the DCBX port role: auto-upstream or auto-downstream. DCBX Operational Status Operational status (enabled or disabled) used to elect a configuration source and internally propagate a DCB configuration. The DCBX operational status is the combination of PFC and ETS operational status. Configuration Source Specifies whether the port serves as the DCBX configuration source on the switch: true (yes) or false (no). Local DCBX Compatibility mode DCBX version accepted in a DCB configuration as compatible. In auto-detection mode, a port can only operate on a DCBX version supported on the remote peer. Local DCBX Configured DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto (port mode auto-configures to use the DCBX version received from a peer). Peer Operating version DCBX version that the peer uses to exchange DCB parameters. Local DCBX TLVs Transmitted Transmission status (enabled or disabled) of advertised DCB TLVs (see TLV code at the top of the show command output). Local DCBX Status: DCBX Operational Version DCBX version advertised in Control TLVs. Local DCBX Status: DCBX Max Version Supported Highest DCBX version supported in Control TLVs. Local DCBX Status: Sequence Number Sequence number transmitted in Control TLVs. Local DCBX Status: Acknowledgment Number Acknowledgement number transmitted in Control TLVs. 96 | Data Center Bridging