Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 192

www.dell.com | support.dell.com Parameters Defaults Command Modes Command History interface none EXEC Privilege Version 8.3.17.0 Enter the following keywords and slot/port or number information: • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet followed by the slot/port information. Supported on M I/O Aggregator debug lldp interface Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming and outgoing packets. Syntax debug lldp interface {interface | all}{events | packet {brief | detail} {tx | rx | both}} To disable debugging, use the no debug lldp interface {interface | all}{events} {packet {brief | detail} {tx | rx | both}} command. Parameters interface all events packet brief detail tx rx both Enter the following keywords and slot/port or number information: • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet followed by the slot/port information. (OPTIONAL) Enter the keyword all to display information on all interfaces. (OPTIONAL) Enter the keyword events to display major events such as timer events. (OPTIONAL) Enter the keyword packet to display information regarding packets coming in or going out. (OPTIONAL) Enter the keyword brief to display brief packet information. (OPTIONAL) Enter the keyword detail to display detailed packet information. (OPTIONAL) Enter the keyword tx to display transmit only packet information. (OPTIONAL) Enter the keyword rx to display receive only packet information (OPTIONAL) Enter the keyword both to display both receive and transmit packet information. Defaults none Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator 190 | Link Layer Discovery Protocol (LLDP)