Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 226

www.dell.com | support.dell.com Example Figure 21-4. show system stack-ports topology Command Example FTOS#show system stack-ports topology Topology: Daisy chain Interface Connection Trunk Group 0/33 0/37 1/37 1/33 1/37 0/37 FTOS# Table 21-1. show system stack-ports Command Description Field Topology Interface Link Speed Admin Status Connection Description Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone The unit/port ID of the connected stack port on this unit Link Speed of the stack port in Gb/s The only currently listed status is Up. The stack port ID to which this unit's stack port is connected Related Commands power-cycle stack-unit show diag show system Resets the designated stack member. Displays the data plane or management plane input and output statistics of the designated component of the designated stack member. Displays the current status of all stack members or a specific member. show system stack-unit iom-mode Displays the current iom-mode (stack/standalone) and the mode configured after next reboot. Syntax show system stack-unit iom-mode[configured] Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator show system stack-unit fanout Displays the current 40GbE ports configured in fanout mode. Syntax show system stack-unit fanout [configured] Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator 224 | Stacking Commands