Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 174

www.dell.com | support.dell.com Command Modes Command History Example EXEC EXEC Privilege Version 8.3.17.0 Supported on M I/O Aggregator Figure 12-11. show ip route summary and show ip route static Command Examples FTOS#show ip route summary Route Source Active Routes Non-active Routes connected 2 0 static 1 0 Total 3 0 Total 3 active route(s) using 612 bytes FTOS#show ip route static ? | Pipe through a command FTOS#show ip route static Destination Gateway Dist/Metric Last Change ----------- ------- *S 0.0.0.0/0 via 10.10.91.9, Te 1/2 1/0 3d2h FTOS# Table 12-7. show ip route all Command Example Fields Field Description (undefined) Destination Gateway Dist/Metric Last Change Identifies the type of route: • C = connected • S = static • R = RIP • B = BGP • IN = internal BGP • EX = external BGP • LO = Locally Originated • O = OSPF • IA = OSPF inter area • N1 = OSPF NSSA external type 1 • N2 = OSPF NSSA external type 2 • E1 = OSPF external type 1 • E2 = OSPF external type 2 • i = IS-IS • L1 = IS-IS level-1 • L2 = IS-IS level-2 • IA = IS-IS inter-area • * = candidate default • > = non-active route • + = summary routes Identifies the route's destination IP address. Identifies whether the route is directly connected and on which interface the route is configured. Identifies if the route has a specified distance or metric. Identifies when the route was last changed or configured. 172 | IPv4 Routing