Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 143
show config from INTERFACE RANGE mode, show config Bulk Configuration Command Example
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Example Figure 11-15. show config Command Example for the INTERFACE Mode FTOS(conf-if)#show conf ! interface TenGigabitEthernet 1/1 no ip address switchport no shutdown FTOS(conf-if)# show config (from INTERFACE RANGE mode) Displays the bulk configured interfaces (group). Syntax show config Command Modes CONFIGURATION INTERFACE (conf-if-range) Command History Example Version 8.3.17.0 Supported on M I/O Aggregator Figure 11-16. show config (Bulk Configuration) Command Example FTOS(conf)#interface range tengigabitethernet 1/1 - 2 FTOS(conf-if-range-tengig-1/1-2)#show config ! interface TenGigabitEthernet 1/1 no ip address switchport no shutdown ! interface TenGigabitEthernet 1/2 no ip address switchport no shutdown FTOS(conf-if-range-tengig-1/1-2)# show config (from INTERFACE VLAN mode) Displays the current configuration of the Default VLAN. Syntax show config Command Modes INTERFACE VLAN Example Figure 11-17. show config Command Example for the Default VLAN FTOS(conf-if-vl-1)#show config ! interface Vlan 1 description a no ip address mtu 2500 shutdown FTOS(conf-if-vl-1)# Command History Version 8.3.17.0 Supported on M I/O Aggregator Interfaces | 141