Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 173
show ip route, show ip interface brief Command Example Partial, Table 12-6.
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Figure 12-10. show ip interface brief Command Example (Partial) FTOS#show ip int brief Interface IP-Address TenGigabitEthernet 0/1 unassigned TenGigabitEthernet 0/2 unassigned TenGigabitEthernet 0/3 unassigned TenGigabitEthernet 0/4 unassigned TenGigabitEthernet 0/5 unassigned TenGigabitEthernet 0/6 unassigned TenGigabitEthernet 0/7 unassigned TenGigabitEthernet 0/8 unassigned TenGigabitEthernet 0/9 unassigned OK? Method Status NO None up YES None up YES None up NO None up NO None up NO None up NO None up NO None up NO None up Protocol down up up down down down down down down Table 12-6. show ip interface brief Column Headings Field Interface IP-Address Ok? Method Status Protocol Description Displays type of interface and the associated slot and port number. Displays the IP address for the interface, if configured. Indicates if the hardware is functioning properly. Displays Manual if the configuration is read from the saved configuration. States whether the interface is enabled (up) or disabled (administratively down). States whether IP is enabled (up) or disabled (down) on the interface. show ip route View information, including how they were learned, about the IP routes on the switch. Syntax show ip route [hostname | ip-address [mask] [longer-prefixes] | list prefix-list [process-id] | connected | static | summary] Parameter ip-address mask longer-prefixes list prefix-list process-id connected static summary (OPTIONAL) Specify a name of a device or the IP address of the device to view more detailed information about the route. (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP address parameter. (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a common prefix. (OPTIONAL) Enter the keyword list and the name of a configured prefix list. (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed. (OPTIONAL) Enter the keyword connected to view only the directly connected routes. (OPTIONAL) Enter the keyword static to view only routes configured by the ip route command. (OPTIONAL) Enter the keyword summary. See show ip route summary. IPv4 Routing | 171