Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 189

Parameters stack-unit unit_number port-set port-pipe address mac-addr dynamic static interface interface vlan vlan-id (REQUIRED) Enter the keyword stack-unit followed by a stack member number to select the stack unit for which to gather information. Range: 0 to 5 (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number to select the Port-Pipe for which to gather information. Range: 0 (OPTIONAL) Enter the keyword address followed by a MAC address in the nn:nn:nn:nn:nn:nn format to display information on that MAC address. (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses learned dynamically by the switch. (OPTIONAL) Enter the keyword static to display only those MAC address specifically configured on the switch. (OPTIONAL) Enter the keyword interface followed by the interface type, slot and port information: • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display the MAC address assigned to the VLAN. Range: 1 to 4094. Command Modes EXEC EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator Layer 2 | 187