Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 111

Parameters interface type slot/ port Display log messages for DHCP packets sent and received on the specified interface. • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/port information. The slot and port range is 0. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Mode EXEC Privilege Default None Command History Version 8.3.17.0 Supported on M I/O Aggregator debug ip dhcp clients packets Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces. Syntax Parameters debug ip dhcp client packets [interface type slot/port] interface type slot/ port Display log messages for DHCP packets sent and received on the specified interface. • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/port information. The slot and port range is 0. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Mode EXEC Privilege Default Command History None Version 8.3.17.0 Supported on M I/O Aggregator release dhcp interface Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client configuration on the interface. Syntax release dhcp interface type slot/port Parameters interface type slot/ port • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/port information. The slot and port range is 0. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Mode EXEC Privilege Default None. Dynamic Host Configuration Protocol (DHCP) | 109