Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 150

www.dell.com | support.dell.com Example Figure 11-23. show interfaces port-channel Command Example (EtherScale) FTOS#show interfaces port-channel Port-channel 1 is down, line protocol is down Hardware address is 00:1e:c9:f1:00:05, Current address is 00:1e:c9:f1:00:05 Interface index is 1107755009 Minimum number of links to bring Port-channel up is 1 Internet address is not set Mode of IP Address Assignment : NONE DHCP Client-ID :lag1001ec9f10005 MTU 1554 bytes, IP MTU 1500 bytes LineSpeed auto Members in this channel: ARP type: ARPA, ARP Timeout 04:00:00 Last clearing of "show interface" counters 03:28:00 Queueing strategy: fifo Input Statistics: 0 packets, 0 bytes 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts 0 Multicasts, 0 Broadcasts 0 runts, 0 giants, 0 throttles 0 CRC, 0 overrun, 0 discarded Output Statistics: 0 packets, 0 bytes, 0 underruns 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts 0 Multicasts, 0 Broadcasts, 0 Unicasts 0 throttles, 0 discarded, 0 collisions Table 11-6. show interfaces port-channel Command Example Fields Field Port-Channel 1... Hardware is... Port-channel is part... Internet address... MTU 1554... LineSpeed Members in this... ARP type:... Last clearing... Queueing strategy. packets input... Input 0 IP packets... 0 64-byte... Received 0... Description Displays the LAG's status. In the example, the status of the LAG's LAG fate-sharing group ("Failover-group") is listed. Displays the interface's hardware information and its assigned MAC address. Indicates whether the LAG is part of a LAG fate-sharing group ("Failover-group"). States whether an IP address is assigned to the interface. If one is, that address is displayed. Displays link and IP MTU. Displays the interface's line speed. For a port channel interface, it is the line speed of the interfaces in the port channel. Displays the interfaces belonging to this port channel. Displays the ARP type and the ARP timeout value for the interface. Displays the time when the show interfaces counters were cleared. States the packet queuing strategy. FIFO means first in first out. Displays the number of packets and bytes into the interface. Displays the number of packets with IP headers, VLAN tagged headers and MPLS headers. The number of packets may not add correctly because a VLAN tagged IP packet counts as both a VLAN packet and an IP packet. Displays the size of packets and the number of those packets entering that interface. This information is displayed over two lines. Displays the type and number of errors or other specific packets received. This information is displayed over three lines. 148 | Interfaces