Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 125

show ip igmp groups View the IGMP groups. Syntax show ip igmp groups [group-address [detail] | detail | interface [group-address [detail]]] Parameters group-address interface detail (OPTIONAL) Enter the group address in dotted decimal format to view information on that group only. (OPTIONAL) Enter the interface type and slot/port information: For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the keyword detail to display the IGMPv3 source information. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.17.0 Supported on M I/O Aggregator Figure 10-1. show ip igmp snooping mrouter Command Example FTOS#show ip igmp groups Total Number of Groups: 5 IGMP Connected Group Membership Group Address Interface Expires Last Reporter 225.0.0.0 Vlan 100 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.1 Vlan 100 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.2 Vlan 100 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.3 Vlan 100 00:02:04 3.0.0.51 Member Ports: Po 2 225.0.0.4 Vlan 100 00:02:04 3.0.0.51 Member Ports: Po 2 Mode IGMPv2 IGMPv2 IGMPv2 IGMPv2 IGMPv2 Uptime 00:00:05 00:00:05 00:00:05 00:00:05 00:00:05 Table 10-1. show ip igmp groups Command Example Fields Field Group Address Interface Mode Uptime Expires Last Reporter Member Ports Description Lists the multicast address for the IGMP group. Lists the interface type, slot and port number. Displays the IGMP version used. Displays the amount of time the group has been operational. Displays the amount of time until the entry expires. Displays the IP address of the last host to be a member of the IGMP group. Indicates the member ports of the port channel. If the port channel is VLT, an asterisk (*) after the port channel number indicates the port channel is locally down and that a remote VLT port is up. Internet Group Management Protocol (IGMP) | 123