Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 172

www.dell.com | support.dell.com Parameter interface brief configuration (OPTIONAL) Enter the following keywords and slot/port or number information: • For the Management interface, enter the keyword ManagementEthernet followed by zero (0). • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the keyword brief to view a brief summary of the interfaces and whether an IP address is assigned. (OPTIONAL) Enter the keyword configuration to display the physical interfaces with non-default configurations only. Command Modes EXEC EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator Example Figure 12-9. show ip interface Command Example FTOS#show ip int te 0/0 TenGigabitEthernet 0/0 is down, line protocol is down Internet address is not set IP MTU is 1500 bytes Inbound access list is not set Proxy ARP is enabled Split Horizon is enabled Poison Reverse is disabled ICMP redirects are not sent ICMP unreachables are not sent FTOS# Table 12-5. show ip interface Command Example Items Lines TenGigabitEthernet 0/0... Internet address... IP MTU is... Inbound access... Proxy ARP... Split horizon... Poison Reverse... ICMP redirects... ICMP unreachables... Description Displays the interface's type, slot/port and physical and line protocol status. States whether an IP address is assigned to the interface. If one is, that address is displayed. Displays IP MTU value. Displays the name of the any configured incoming access list. If none is configured, the phrase "not set" is displayed. States whether proxy ARP is enabled on the interface. States whether split horizon for RIP is enabled on the interface. States whether poison for RIP is enabled on the interface States if ICMP redirects are sent. States if ICMP unreachable messages are sent. 170 | IPv4 Routing