Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 47
ftp-server username, hostname, ip telnet server enable
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
ftp-server username Create a user name and associated password for incoming FTP server sessions. Syntax ftp-server username username password [encryption-type] password Parameters username password password encryption-type Enter a text string up to 40 characters long as the user name. Enter the keyword password followed by a string up to 40 characters long as the password. Without specifying an encryption type, the password is unencrypted. (OPTIONAL) After the keyword password enter one of the following numbers: • 0 (zero) for an unecrypted (clear text) password • 7 (seven) for hidden text password. Defaults Not enabled. Command Modes CONFIGURATION Command History Version 8.3.17.0 Supported on M I/O Aggregator hostname Set the host name of the system. Syntax hostname name Parameters name Enter a text string, up to 32 characters long. Defaults FTOS Command Modes CONFIGURATION Command History Version 8.3.17.0 Supported on M I/O Aggregator ip telnet server enable Enable the Telnet server on the switch. Syntax ip telnet server enable To disable the Telnet server, use the no ip telnet server enable command. Defaults Enabled Command Modes CONFIGURATION Command History Version 8.3.17.0 Supported on M I/O Aggregator Control and Monitoring | 45