Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 92
clear ets counters, clear pfc counters, dcb enable auto-detect on-next-reload
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
www.dell.com | support.dell.com clear ets counters Clear ETS TLV counters. Syntax Parameters clear ets counters [tengigabitethernet slot/port] slot/port Enter the slot/port number. Defaults None Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator clear pfc counters Clear PFC TLV counters. Syntax Parameters clear pfc counters [stack-unit unit-number | tengigabitethernet slot/port] unit number slot/port Number of the member stack unit. Valid values: 0 to 5. Default: 0 Enter the slot/port number. Defaults None Command Modes EXEC Privilege Command History Version 8.3.17.0 Supported on M I/O Aggregator dcb enable auto-detect on-next-reload Enables or disables global DCB on a subsequent reload. This command also internally configures PFC buffers based on DCB enable/disable. Save and reload is mandatory for the configurations to take effect. Auto-detect keyword can be used to re-enable IOA with port wise DCB auto detect feature. Syntax dcb enable {on-next-reload | auto-detect on-next-reload} To disable global DCB on a subsequent reload, use the no dcb enable on-next-reload command. Parameters auto-detect Enter this key word to re-enable the Aggregator with port wise DCB auto detect feature. Defaults DCB is globally enabled with auto-detect feature. Command Modes CONFIGURATION 90 | Data Center Bridging