Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 171
show ip interface
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
member-info summary Enter the keyword member-info to display the group index used by the ecmp, the number of egress ports (members) for the ecmp, and the port details of each member. The detail information under member-info will give the MAC address, VLAN ID and gateway of every member port of the ecmp. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.17.0 Supported on M I/O Aggregator Figure 12-8. show ip cam stack-unit Command Example FTOS#show ip multicast-cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes Destination EC CG V C VId Mac-Addr Port 10.10.10.10 0 011 0 00:00:00:00:00:00 3f01 CP FTOS# Table 12-4. show ip cam Command Example Fields Field Destination CG V C V Id Mac Addr Port Description Displays the destination route of the index. Displays 0. Displays a 1 if the entry is valid and a 0 otherwise. Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the control processor, depending on Egress port. Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN. Displays the next-hop router's MAC address. Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion. CP = control processor Fo= 40 Gigabit Ethernet interface Te = 10 Gigabit Ethernet interface show ip interface View IP-related information on all interfaces. Syntax show ip interface [interface | brief] [configuration] IPv4 Routing | 169