Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 95
Enable DCB with Auto-Detect Command Example 3, Example 3
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Example 3 Figure 7-3. Enable DCB with Auto-Detect Command Example 3 FTOS#show dcb stack-unit 0 port-set 0 stack-unit 0 port-set 0 DCB Status : Disabled PFC Port Count : 0 (current), 0 (configured) PFC Queue Count : 0 (current), 0 (configured) FTOS# FTOS# FTOS#conf FTOS(conf)#dcb enable auto-detect on-next-reload FTOS(conf)#00:02:35: %STKUNIT0-M:CP %DIFFSERV-6-DCB_ENABLE_CFG_ON_RELOAD: Global DCB will be enabled on subsequent reload, PFC buffers will be reserved for all pfc ports and max loss less queues supported for each stack unit. For the pfc-buffering change to take effect, please save the config and reload the system. FTOS(conf)#end FTOS#00:02:38: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from console FTOS#write memory 00:02:41: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by default FTOS#reload Proceed with reload [confirm yes/no]: yes syncing disks... done unmounting file systems... unmounting /f10/flash (/dev/ld0e)... unmounting /usr (mfs:31)... unmounting /lib (mfs:23)... unmounting /f10 (mfs:20)... unmounting /tmp (mfs:15)... unmounting /kern (kernfs)... unmounting / (/dev/md0a)... done rebooting... FTOS#show dcb stack-unit 0 port-set 0 stack-unit 0 port-set 0 DCB Status : Enabled PFC Port Count : 56 (current), 56 (configured) PFC Queue Count : 2 (current), 2 (configured) FTOS# Data Center Bridging | 93