Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 215

logging history Specify which messages are logged to the history table of the switch and the SNMP network management station (if configured). Syntax logging history level To return to the default values, use the no logging history command. Parameters level Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 4. Defaults 4 or warnings Command Modes CONFIGURATION Command History Version 8.3.17.0 Supported on M I/O Aggregator Related Commands show logging history Displays information logged to the history buffer. logging history size Specify the number of messages stored in the FTOS logging history table. Syntax logging history size size To return to the default values, use the no logging history size command. Parameters size Indicate a value as the number of messages to be stored. Range: 0 to 500. Default: 1 message. Defaults 1 message Command Modes CONFIGURATION Command History Usage Information Version 8.3.17.0 Supported on M I/O Aggregator When the number of messages reaches the limit you set with the logging history size command, older messages are deleted as newer ones are added to the table. Related Commands show logging history Displays information logged to the history buffer. Simple Network Management Protocol (SNMP) and Syslog | 213