Dell PowerEdge XL 5133-4 Dell PowerEdge FTOS Command Line Reference Guide for - Page 229
Storm Control, Overview, Storm Control Commands
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
22 Storm Control Overview The Dell Force10 operating software (FTOS) storm control feature allows users to limit or suppress traffic during a traffic storm. Note: When iSCSI storage devices are detected on the server-ports, storm-control is disabled on the those ports. When the iSCSI devices are off the ports, storm-control is enabled again. Storm Control Commands The storm control commands are: • io-aggregator broadcast storm-control • show io-aggregator broadcast storm-control status io-aggregator broadcast storm-control Rate-limit the broadcast traffic to 1 Gbps. Syntax io-aggregator broadcast storm-control To disable storm control, use the no io-aggregator broadcast storm-control command. Defaults Enabled Command Modes Command History CONFIGURATION Version 8.3.17.0 Supported on M I/O Aggregator show io-aggregator broadcast storm-control status Shows if storm control is enabled or disabled. If enabled, displays information on the rate limit value. Syntax show io-aggregator broadcast storm-control status Command Modes EXEC Privilege Storm Control | 227