HP 4100n HP LaserJet 4100 Series - User Guide - Page 118
Press Go To, Output Bin Full - perform printer maintenance
View all HP 4100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Printer messages (continued) Message Explanation or recommended action MEMORY SHORTAGE PAGE SIMPLIFIED NON HP TONER DETECTED alternates with PRESS GO TO CONTINUE OFFLINE OUTPUT BIN FULL alternates with CLEAR PAPER FROM [BINNAME ] PAPER WRAPPED AROUND FUSER PERFORM PRINTER MAINTENANCE PRINTER LANGUAGE NOT AVAILABLE PROCESSING AUTO CLEANING PAGE PROCESSING CLEANING PAGE RAM DISK DEVICE FAILURE The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred. Press GO to continue. The print quality of these pages may not be acceptable. Reduce the complexity of these pages and reprint them. Consider adding more memory to the printer (see "Printer memory and expansion" on page 229). The printer has detected that the toner cartridge is not a genuine HP toner cartridge. If you believe you purchased an HP toner cartridge, call the HP fraud hotline (see "HP fraud hotline" on page 161). Any printer repair required as a result of using non-HP toner is not covered under the printer warranty. Press GO to place the printer online. The output bin is full and needs to be emptied. Turn the printer off to keep the paper from wrapping more firmly around the fuser. Open the top cover and remove the toner cartridge. Remove all visible paper. If you cannot locate the paper, leave printer turned off and remove the fuser to remove paper (see "Clearing jams from the fuser area" on page 107). To ensure optimum print quality, the printer prompts you to perform routine maintenance every 200,000 pages. (To order a printer maintenance kit, see "Ordering information" on page 22. For information on maintenance, see "Performing preventative maintenance" page 93.) A print job requested a printer language that does not exist in the printer. The job will not print and will be cleared from memory. Print the job using a driver for a different printer language, or add the requested language to the printer (if available). Press GO to continue. The printer is conducting the auto cleaning page process. This can take up to 2.5 minutes. The printer is conducting the manual cleaning page process. This can take up to 2.5 minutes. The RAM disk had a critical failure and can no longer be used. 116 Chapter 4 - Problem solving EN