HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 122
To con dynamic MAC-based VLAN assignment, With dynamic MAC-based VLAN
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Step 1. Enter system view. Command system-view mac-vlan mac-address 2. Associate a specific MAC mac-address [ mask address with a VLAN. mac-mask ] vlan vlan-id [ priority priority ] Remarks N/A N/A 3. Enter Layer 2 Ethernet interface view. interface interface-type interface-number N/A 4. Configure the link type of the ports as hybrid. port link-type hybrid 5. Configure the hybrid ports to permit packets port hybrid vlan vlan-list from specific MAC-based { tagged | untagged } VLANs to pass through. 6. Enable the MAC-based VLAN feature. mac-vlan enable By default, all ports are access ports. By default, a hybrid port only permits the packets from VLAN 1 to pass through. Disabled by default. 7. Configure VLAN matching precedence. vlan precedence { mac-vlan | ip-subnet-vlan } Optional. By default, VLANs are preferably matched based on MAC addresses. To configure dynamic MAC-based VLAN assignment: Step 1. Enter system view. 2. Associate MAC addresses with a VLAN. 3. Enter Ethernet interface view. 4. Configure the link type of the port as hybrid. 5. Enable the MAC-based VLAN feature. Command system-view mac-vlan mac-address mac-address vlan vlan-id [ priority priority ] interface interface-type interface-number port link-type hybrid mac-vlan enable Remarks N/A With dynamic MAC-based VLAN assignment enabled, a port is automatically assigned to the VLAN in the MAC address-to-VLAN entry that is exactly matched by the source MAC address of the packet received on the port. N/A By default, all ports are access ports. Disabled by default. 113