HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 130

Configuration guidelines, Configuring IP subnet-based VLANs, Configuration procedure

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 130 highlights

200 1 ipv6 Configuration guidelines Protocol-based VLAN configuration applies only to hybrid ports. Configuring IP subnet-based VLANs In this approach, packets are assigned to VLANs based on their source IP addresses and subnet masks. A port configured with IP subnet-based VLANs assigns a received untagged packet to a VLAN based on the source address of the packet. This feature is used to assign packets from the specified IP subnet or IP address to a specific VLAN. Configuration procedure IMPORTANT: This feature is applicable only on hybrid ports. To configure an IP subnet-based VLAN: Step 1. Enter system view. Command system-view Remarks N/A 2. Enter VLAN view. vlan vlan-id N/A 3. Associate an IP subnet with the VLAN. ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ] The IP subnet or IP address to be associated with a VLAN cannot be a multicast subnet or a multicast address. 4. Return to system view. quit N/A 5. Enter interface view. 6. Configure port link type as hybrid. 7. Configure the hybrid ports to permit the specified IP subnet-based VLANs to pass through. Use any command. • The configuration made in Ethernet interface view applies only to the port. • Enter Layer 2 Ethernet interface • The configuration made in Layer 2 view: aggregate interface view applies to interface interface-type the aggregate interface and its interface-number aggregation member ports. If the • Enter Layer 2 aggregate interface view: interface bridge-aggregation interface-number system fails to apply the configuration to the aggregate interface, it stops applying the configuration to aggregation member ports. If the system fails to apply the configuration to an aggregation member port, it skips the port and moves to the next member port. port link-type hybrid By default, all ports are access ports. port hybrid vlan vlan-list { tagged | untagged } By default, a hybrid port allows only packets from VLAN 1 to pass through untagged. 121

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
121
200
1
ipv6
Configuration guidelines
Protocol-based VLAN configuration applies only to hybrid ports.
Configuring IP subnet-based VLANs
In this approach, packets are assigned to VLANs based on their source IP addresses and subnet masks.
A port configured with IP subnet-based VLANs assigns a received untagged packet to a VLAN based on
the source address of the packet.
This feature is used to assign packets from the specified IP subnet or IP address to a specific VLAN.
Configuration procedure
IMPORTANT:
This feature is applicable only on hybrid ports.
To configure an IP subnet-based VLAN:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VLAN view.
vlan
vlan-id
N/A
3.
Associate an IP subnet
with the VLAN.
ip-subnet-vlan
[
ip-subnet-index
]
ip
ip-address
[
mask
]
The IP subnet or IP address to be
associated with a VLAN cannot be a
multicast subnet or a multicast address.
4.
Return to system view.
quit
N/A
5.
Enter interface view.
•
Enter Layer 2 Ethernet interface
view:
interface
interface-type
interface-number
•
Enter Layer 2 aggregate
interface view:
interface bridge-aggregation
interface-number
Use any command.
•
The configuration made in Ethernet
interface view applies only to the port.
•
The configuration made in Layer 2
aggregate interface view applies to
the aggregate interface and its
aggregation member ports. If the
system fails to apply the configuration
to the aggregate interface, it stops
applying the configuration to
aggregation member ports. If the
system fails to apply the configuration
to an aggregation member port, it
skips the port and moves to the next
member port.
6.
Configure port link
type as hybrid.
port link-type
hybrid
By default, all ports are access ports.
7.
Configure the hybrid
ports to permit the
specified IP
subnet-based VLANs
to pass through.
port hybrid
vlan
vlan-list
{
tagged
|
untagged
}
By default, a hybrid port allows only
packets from VLAN 1 to pass through
untagged.