HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 193
Configuring an uplink policy for the customer-side port, Description, Command, Remarks
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Task Configuring the network-side port Description Required Configure VLAN and other settings required for two-to-two VLAN mapping. Configuring an uplink policy for the customer-side port The uplink policy on the customer-side port modifies the SVLAN ID of incoming traffic. To configure an uplink policy for the customer-side port: Step Command 1. Enter system view. system-view 2. Create a class and enter traffic classifier tcl-name [ operator class view. and ] 3. Specify a foreign CVLAN as a match criterion. if-match customer-vlan-id vlan-id 4. Specify a foreign SVLAN as a match criterion. if-match service-vlan-id vlan-id 5. Return to system view. quit 6. Create a traffic behavior and enter traffic behavior traffic behavior behavior-name view. 7. Configure an SVLAN marking action to replace the foreign SVLAN ID with remark service-vlan-id vlan-id a local SVLAN ID. 8. Return to system view. quit 9. Create a QoS policy and enter QoS policy view. qos policy policy-name 10. Associate the class with the behavior. classifier tcl-name behavior behavior-name Remarks N/A Repeat these steps to create one class for each foreign CVLAN and SVLAN pair. Repeat these steps to configure one SVLAN marking action for each CVLAN and SVLAN pair. N/A Repeat this step to create other class-behavior associations. NOTE: If you do not need to replace the SVLAN tags, skip these steps. Configuring an uplink policy for the network-side port The uplink policy on the network-side port modifies the CVLAN ID of incoming traffic. To configure an uplink policy for the network-side port: Step 1. Enter system view. Command system-view Remarks N/A 184