HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 158
Configuration procedure, Create VLAN 2 a static VLAN.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Figure 46 Network diagram Configuration procedure 1. Configure Device A: # Enable GVRP globally. system-view [DeviceA] gvrp # Configure port GigabitEthernet 1/0/1 as a trunk port, and assign it to all VLANs. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] port link-type trunk [DeviceA-GigabitEthernet1/0/1] port trunk permit vlan all # Enable GVRP on trunk port GigabitEthernet 1/0/1. [DeviceA-GigabitEthernet1/0/1] gvrp [DeviceA-GigabitEthernet1/0/1] quit # Create VLAN 2 (a static VLAN). [DeviceA] vlan 2 [DeviceA-vlan2] quit 2. Configure Device B: # Enable GVRP globally. system-view [DeviceB] gvrp # Configure port GigabitEthernet 1/0/1 as a trunk port, and assign it to all VLANs. [DeviceB] interface gigabitethernet 1/0/1 [DeviceB-GigabitEthernet1/0/1] port link-type trunk [DeviceB-GigabitEthernet1/0/1] port trunk permit vlan all # Enable GVRP on trunk port GigabitEthernet 1/0/1. [DeviceB-GigabitEthernet1/0/1] gvrp [DeviceB-GigabitEthernet1/0/1] quit # Create VLAN 3 (a static VLAN). [DeviceB] vlan 3 [DeviceB-vlan3] quit 3. Verify the configuration: Use the display gvrp local-vlan command to display the local VLAN information that GVRP maintains on ports. For example: # Display the local VLAN information that GVRP maintains on port GigabitEthernet 1/0/1 of Device A. [DeviceA] display gvrp local-vlan interface gigabitethernet 1/0/1 Following VLANs exist in GVRP local database: 1(default),2-3 According to the output, information about VLAN 1, static VLAN information of VLAN 2 on the local device, and dynamic VLAN information of VLAN 3 on Device B are all registered through GVRP. 149