HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 22
Displaying and maintaining an Ethernet interface
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step Command Remarks 1. Enter system view. system-view N/A 2. Set the traffic polling interval of the storm control module. storm-constrain interval seconds Optional. 10 seconds by default. 3. Enter Ethernet interface view. interface interface-type interface-number N/A 4. Enable storm control, and set the lower and upper thresholds for broadcast, multicast, or unknown unicast traffic. storm-constrain { broadcast | multicast | unicast } { pps | kbps | ratio } max-pps-values min-pps-values Disabled by default. 5. Set the control action to take when monitored traffic exceeds the upper threshold. storm-constrain control { block | shutdown } Optional. Disabled by default. Optional. 6. Enable the interface to send storm control threshold event traps.. storm-constrain enable trap By default, the interface sends traps when monitored traffic exceeds the upper threshold or drops below the lower threshold from the upper threshold. 7. Enable the interface to log storm control threshold events.. storm-constrain enable log Optional. By default, the interface outputs log messages when monitored traffic exceeds the upper threshold or drops below the lower threshold from the upper threshold. Displaying and maintaining an Ethernet interface Task Command Remarks Display Ethernet interface information. display interface [ interface-type ] brief [ down ] [ | { begin | exclude | include } regular-expression ] display interface interface-type interface-number [ brief ] [ | { begin | exclude | include } regular-expression ] Available in any view Display traffic statistics for the specified interfaces. display counters { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include } regular-expression ] Available in any view Display traffic rate statistics over the last sampling interval. display counters rate { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include } regular-expression ] Available in any view Display information about discarded packets on the specified interfaces. display packet-drop interface [ interface-type [ interface-number ] ] [ | { begin | exclude | include } regular-expression ] Available in any view Display summary information about discarded packets on all interfaces. display packet-drop summary [ | { begin | exclude | include } regular-expression ] Available in any view 13