HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 180
Con GigabitEthernet 1/0/2, to the outgoing traffic on the port.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
[PE1-behavior-P200] nest top-most vlan-id 200 [PE1-behavior-P200] quit # Create a QoS policy named qinq, associate traffic class A10 with traffic behavior P100, and associate traffic class A20 with traffic behavior P200. [PE1] qos policy qinq [PE1-qospolicy-qinq] classifier A10 behavior P100 [PE1-qospolicy-qinq] classifier A20 behavior P200 [PE1-qospolicy-qinq] quit # Enable basic QinQ on the port. [PE1] interface gigabitethernet 1/0/1 [PE1-GigabitEthernet1/0/1] qinq enable # Apply QoS policy qinq to the incoming traffic on the port. [PE1-GigabitEthernet1/0/1] qos apply policy qinq inbound { Configure GigabitEthernet 1/0/2: # Configure GigabitEthernet 1/0/2 as a trunk port and assign it to VLAN 100 and VLAN 200. [PE1] interface gigabitethernet 1/0/2 [PE1-GigabitEthernet1/0/2] port link-type trunk [PE1-GigabitEthernet1/0/2] port trunk permit vlan 100 200 # Create class A100 and configure the class to match frames with CVLAN 10 and SVLAN 100. [PE1] traffic classifier A100 [PE1-classifier-A100] if-match customer-vlan-id 10 [PE1-classifier-A100] if-match service-vlan-id 100 [PE1-classifier-A100] quit # Configure traffic behavior T100 to mark matching packets with CVLAN 30. [PE1] traffic behavior T100 [PE1-behavior-T100] remark customer-vlan-id 30 [PE1-behavior-T100] quit # Create class A200 and configure the class to match frames with CVLAN 20 and SVLAN 200. [PE1] traffic classifier A200 [PE1-classifier-A200] if-match customer-vlan-id 20 [PE1-classifier-A200] if-match service-vlan-id 200 [PE1-classifier-A200] quit # Configure traffic behavior T200 to mark matching packets with CVLAN 40. [PE1] traffic behavior T200 [PE1-behavior-T200] remark customer-vlan-id 40 [PE1-behavior-T200] quit # Create a QoS policy named sqinq, associate traffic class A100 with traffic behavior T100, and associate traffic class A200 with traffic behavior T200. [PE1] qos policy sqinq [PE1-qospolicy-sqinq] classifier A100 behavior T100 [PE1-qospolicy-sqinq] classifier A200 behavior T200 [PE1-qospolicy-sqinq] quit # Apply QoS policy sqinq to the outgoing traffic on the port. [PE1-GigabitEthernet1/0/2] qos apply policy sqinq outbound 171