HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 177
Apply QoS policy, Con GigabitEthernet 1/0/2
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
[PE1-behavior-P100] quit # Create class A20 and configure the class to match frames with CVLAN 20. Create traffic behavior P200 and add the action of inserting outer VLAN tag 200. [PE1] traffic classifier A20 [PE1-classifier-A20] if-match customer-vlan-id 20 [PE1-classifier-A20] quit [PE1] traffic behavior P200 [PE1-behavior-P200] nest top-most vlan-id 200 [PE1-behavior-P200] quit # Create a QoS policy named qinq, associate traffic class A10 with traffic behavior P100, and associate traffic class A20 with traffic behavior P200. [PE1] qos policy qinq [PE1-qospolicy-qinq] classifier A10 behavior P100 [PE1-qospolicy-qinq] classifier A20 behavior P200 [PE1-qospolicy-qinq] quit # Enable basic QinQ on the port. [PE1] interface gigabitethernet 1/0/1 [PE1-GigabitEthernet1/0/1] qinq enable # Apply QoS policy qinq to the incoming traffic on the port. [PE1-GigabitEthernet1/0/1] qos apply policy qinq inbound { Configure GigabitEthernet 1/0/2: # Configure GigabitEthernet 1/0/2 as a trunk port and assign it to VLAN 100 and VLAN 200. [PE1] interface gigabitethernet 1/0/2 [PE1-GigabitEthernet1/0/2] port link-type trunk [PE1-GigabitEthernet1/0/2] port trunk permit vlan 100 200 # Set the TPID in the outer VLAN tags to 0x8200. [PE1-GigabitEthernet1/0/2] qinq ethernet-type service-tag 8200 [PE1-GigabitEthernet1/0/2] quit 2. Configure PE 2: { Configure GigabitEthernet 1/0/1: # Configure GigabitEthernet 1/0/1 as a hybrid port to permit frames of VLAN 100 and VLAN 200 to pass through untagged. [PE2] interface gigabitethernet 1/0/1 [PE2-GigabitEthernet1/0/1] port link-type hybrid [PE2-GigabitEthernet1/0/1] port hybrid vlan 100 200 untagged [PE2-GigabitEthernet1/0/1] quit # Create class A10 and configure the class to match frames from Site 2 with CVLAN 10. [PE2] traffic classifier A10 [PE2-classifier-A10] if-match customer-vlan-id 10 [PE2-classifier-A10] quit # Create traffic behavior P100 and add the action of inserting outer VLAN tag 100. [PE2] traffic behavior P100 [PE2-behavior-P100] nest top-most vlan-id 100 [PE2-behavior-P100] quit # Create class A20 and configure the class to match frames with CVLAN 20. Create traffic behavior P200 and add the action of inserting outer VLAN tag 200. 168