HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 201
Con PE 3, Con customer-side port GigabitEthernet 1/0/1 as a trunk port
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
# Configure port GigabitEthernet 1/0/2 as a trunk port, and assign it to VLAN 100. [PE2] interface gigabitethernet 1/0/2 [PE2-GigabitEthernet1/0/2] port link-type trunk [PE2-GigabitEthernet1/0/2] port trunk permit vlan 100 3. Configure PE 3: # Configure an uplink policy down_uplink for customer-side port GigabitEthernet 1/0/1 to substitute SVLAN ID 200 for the SVLAN ID in the incoming traffic tagged with CVLAN 10 and SVLAN 100. system-view [PE3] traffic classifier down_uplink [PE3-classifier-down_uplink] if-match customer-vlan-id 10 [PE3-classifier-down_uplink] if-match service-vlan-id 100 [PE3-classifier-down_uplink] quit [PE3] traffic behavior down_uplink [PE3-behavior-down_uplink] remark service-vlan-id 200 [PE3-behavior-down_uplink] quit [PE3] qos policy down_uplink [PE3-qospolicy-down_uplink] classifier down_uplink behavior down_uplink [PE3-qospolicy-down_uplink] quit # Configure a downlink policy down_downlink for customer-side port GigabitEthernet 1/0/1 to substitute CVLAN 10 and SVLAN 100 for traffic tagged with CVLAN 30 and SVLAN 200. [PE3] traffic classifier down_downlink [PE3-classifier-down_downlink] if-match customer-vlan-id 30 [PE3-classifier-down_downlink] if-match service-vlan-id 200 [PE3-classifier-down_downlink] quit [PE3] traffic behavior down_downlink [PE3-behavior-down_downlink] remark customer-vlan-id 10 [PE3-behavior-down_downlink] remark service-vlan-id 100 [PE3-behavior-down_downlink] quit [PE3] qos policy down_downlink [PE3-qospolicy-down_downlink] classifier down_downlink behavior down_downlink [PE3-qospolicy-down_downlink] quit # Configure an uplink policy up_uplink for network-side port GigabitEthernet 1/0/2 to substitute CVLAN 30 for the CVLAN ID of the outgoing traffic tagged with CVLAN 10 and SVLAN 200. [PE3] traffic classifier up_uplink [PE3-classifier-up_uplink] if-match customer-vlan-id 10 [PE3-classifier-up_uplink] if-match service-vlan-id 200 [PE3-classifier-up_uplink] quit [PE3] traffic behavior up_uplink [PE3-behavior-up_uplink] remark customer-vlan-id 30 [PE3-behavior-up_uplink] quit [PE3] qos policy up_uplink [PE3-qospolicy-up_uplink] classifier up_uplink behavior up_uplink [PE3-qospolicy-up_uplink] quit # Configure customer-side port GigabitEthernet 1/0/1 as a trunk port, assign it to VLAN 200, and apply uplink policy down_uplink to the incoming traffic and downlink policy down_downlink to the outgoing traffic on the port. [PE3] interface gigabitethernet 1/0/1 192