HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 182
to mark matching packets with CVLAN 20., Create a QoS policy named
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
[PE2-classifier-A100] if-match customer-vlan-id 30 [PE2-classifier-A100] if-match service-vlan-id 100 [PE2-classifier-A100] quit # Configure traffic behavior T100 to mark matching packets with CVLAN 10. [PE2] traffic behavior T100 [PE2-behavior-T100] remark customer-vlan-id 10 [PE2-behavior-T100] quit # Create class A200 and configure the class to match frames with CVLAN 40 and SVLAN 200. [PE2] traffic classifier A200 [PE2-classifier-A200] if-match customer-vlan-id 40 [PE2-classifier-A200] if-match service-vlan-id 200 [PE2-classifier-A200] quit # Configure traffic behavior T200 to mark matching packets with CVLAN 20. [PE2] traffic behavior T200 [PE2-behavior-T200] remark customer-vlan-id 20 [PE2-behavior-T200] quit # Create a QoS policy named sqinq, associate traffic class A100 with traffic behavior T100, and associate traffic class A200 with traffic behavior T200. [PE2] qos policy sqinq [PE2-qospolicy-sqinq] classifier A100 behavior T100 [PE2-qospolicy-sqinq] classifier A200 behavior T200 [PE2-qospolicy-sqinq] quit # Apply QoS policy sqinq to the outgoing traffic on the port. [PE2] interface gigabitethernet 1/0/2 [PE1-GigabitEthernet1/0/2] qos apply policy sqinq outbound # Set the TPID value in the outer tag to 0x8200. [PE2-GigabitEthernet1/0/2] qinq ethernet-type service-tag 8200 [PE2-GigabitEthernet1/0/2] quit 3. On the third-party devices between PE 1 and PE 2, configure the port that connects to PE 1 and that connecting to PE 2 to allow tagged frames of VLAN 100 and VLAN 200 to pass through. 173