HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 181
associate traffic class, to the incoming traffic on the port.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
# Set the TPID value in the outer tag to 0x8200. [PE1-GigabitEthernet1/0/2] qinq ethernet-type service-tag 8200 [PE1-GigabitEthernet1/0/2] quit 2. Configure PE 2: { Configure GigabitEthernet 1/0/1: # Configure GigabitEthernet 1/0/1 as a hybrid port to permit frames of VLAN 100 and VLAN 200 to pass through untagged. [PE2] interface gigabitethernet 1/0/1 [PE2-GigabitEthernet1/0/1] port link-type hybrid [PE2-GigabitEthernet1/0/1] port hybrid vlan 100 200 untagged [PE2-GigabitEthernet1/0/1] quit # Create class A30 and configure the class to match frames with CVLAN 30. [PE2] traffic classifier A30 [PE2-classifier-A30] if-match customer-vlan-id 30 [PE2-classifier-A30] quit # Create traffic behavior P100 and add the action of inserting outer VLAN tag 100. [PE2] traffic behavior P100 [PE2-behavior-P100] nest top-most vlan-id 100 [PE2-behavior-P100] quit # Create class A40 and configure the class to match frames with CVLAN 40. Create traffic behavior P200 and add the action of inserting outer VLAN tag 200. [PE2] traffic classifier A40 [PE2-classifier-A40] if-match customer-vlan-id 40 [PE2-classifier-A40] quit [PE2] traffic behavior P200 [PE2-behavior-P200] nest top-most vlan-id 200 [PE2-behavior-P200] quit # Create a QoS policy named qinq, associate traffic class A30 with traffic behavior P100, and associate traffic class A40 with traffic behavior P200. [PE2] qos policy qinq [PE2-qospolicy-qinq] classifier A30 behavior P100 [PE2-qospolicy-qinq] classifier A40 behavior P200 [PE2-qospolicy-qinq] quit # Enable basic QinQ on the port. [PE2] interface gigabitethernet 1/0/1 [PE2-GigabitEthernet1/0/1] qinq enable # Apply QoS policy qinq to the incoming traffic on the port. [PE2-GigabitEthernet1/0/1] qos apply policy qinq inbound { Configure GigabitEthernet 1/0/2: # Configure GigabitEthernet 1/0/2 as a trunk port and assign it to VLAN 100 and VLAN 200. [PE2] interface gigabitethernet 1/0/2 [PE2-GigabitEthernet1/0/2] port link-type trunk [PE2-GigabitEthernet1/0/2] port trunk permit vlan 100 200 # Create class A100 and configure the class to match frames with CVLAN 30 and SVLAN 100. [PE2] traffic classifier A100 172